DS-NCD1015ZP-R02

www.ixysic.com

1

Features

Communications Format

Applications

Description

The NCD1015ZP is a passive 50mm cylindrical low

frequency half-duplex read-only radio frequency

identification (RFID) transponder that operates at a

resonant frequency of 134.2kHz. With 64-bits of

pre-programmed identification data storage and a

16-bit CRC error checking code generator, the

transponder supports ISO 11784 and ISO 11785

standards.

Using the power acquired from harvesting the RF

energy transmitted by the RFID reader, the passive

transponder responds by sending out a 128-bit packet

that contains the stored 64-bit data, a 16-bit

CRC-CCITT error checking code, and the overhead

bits necessary to ensure transmission recognition.

Transmission of the digital data from the transponder

to the reader utilizes an FSK modulation technique

where a logic 0 is represented by a 16 cycle burst of

134.2 kHz while a logic 1 uses 124.2 kHz.

Ordering Information

Block Diagram

Part #

Description

NCD1015ZP

50mm HDX RFID 64-bit Data Transponder, Pre-programmed Identification Code

Bit 1 = 0 :: Non-animal

Bits 2 - 16 = 0x0000

Bits 27 - 64 :: Unique Identification Code - value will be incremented at the factory to provide a unique code for each device.

NCD1015ZPC

50mm HDX RFID 64-bit Data Transponder, Custom programmed Identification Code: Contact the factory.

NCD1015

Charge Storage

Capacitor

Antenna

NCD1015ZP

50mm Half Duplex

Read-Only RFID Transponder