EP7212 datasheet(95/136 Pages) CIRRUS

95 / 136 page

EP7212

DS474PP1

5.16.3.7

Left Channel Transmit FIFO Underrun Status (LCTU)

The Left Channel Transmit FIFO Underrun Status Bit (LCTU) is set when the Left Channel Transmit

logic attempts to fetch data from the FIFO after it has been completely emptied. When an underrun

occurs, the Left Channel Transmit logic continuously transmits the last valid left channel value which

was transmitted before the underrun occurred. Once data is placed in the FIFO and it is transferred

down to the bottom, the Left Channel Transmit logic uses the new value within the FIFO for transmis-

sion. When the LCTU bit is set, an interrupt request is made.

5.16.3.8

Left Channel Receive FIFO Overrun Status (LCRO)

The Left Channel Receive FIFO Overrun Status Bit (LCRO) is set when the Left Channel Receive log-

ic places data into the Left Channel Receive FIFO after it has been completely filled. Each time a new

piece of data is received, the set signal to the LCRO status bit is asserted, and the newly received

sample is discarded. This process is repeated for each new piece of data received until at least one

empty FIFO entry exists. When the LCRO bit is set, an interrupt request is made.

5.16.3.9

Right Channel Transmit FIFO Not Full Flag (RCNF)

The Right Channel Transmit FIFO Not Full Flag (RCNF) is a read-only bit which is set whenever the

Right Channel Transmit FIFO contains one or more entries which do not contain valid data and is

cleared when the FIFO is completely full. This bit can be polled when using programmed I/O to fill the

Right Channel Transmit FIFO. This bit does not request an interrupt.

5.16.3.10 Right Channel Receive FIFO Not Empty Flag (RCNE)

The Right Channel Receive FIFO Not Empty Flag (RCNELCNF) is a read-only bit which is set when

ever the Right Channel Receive FIFO contains one or more entries of valid data and is cleared when

it no longer contains any valid data. This bit can be polled when using programmed I/O to remove

remaining data from the receive FIFO. This bit does not request an interrupt.

5.16.3.11 Left Channel Transmit FIFO Not Full Flag (LCNF)

The Left Channel Transmit FIFO Not Full Flag (LCNF) is a read-only bit which is set when ever the

Left Channel Transmit FIFO contains one or more entries which do not contain valid data. It is cleared

when the FIFO is completely full. This bit can be polled when using programmed I/O to fill the Left

Channel Transmit FIFO. This bit does not request an interrupt.

5.16.3.12 Left Channel Receive FIFO Not Empty Flag (LCNE)

The Left Channel Receive FIFO Not Empty Flag (LCNE) is a read-only bit which is set when ever the

Left Channel Receive FIFO contains one or more entries of valid data and is cleared when it no longer

contains any valid data. This bit can be polled when using programmed I/O to remove remaining data

from the receive FIFO. This bit does not request an interrupt.

5.16.3.13 FIFO Operation Completed Flag (FIFO)

The FIFO Operation Completed (FIFO) Flag is set after the FIFO operation requested by writing to

DAIDR2 as completed.

FIFO is automatically cleared when DAIDR2 is read or written. This bit does not request an interrupt.

EP7212 bảng dữ liệu(PDF) 95 Page - Cirrus Logic

EP7212 bảng dữ liệu(HTML) 95 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL