LP1030D datasheet(3/3 Pages) SUTEX

3 / 3 page

Supertex inc.

does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives

an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability

to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and

specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com)

Supertex inc.

1235 Bordeaux Drive, Sunnyvale, CA 94089

Tel: 408-222-8888

www.supertex.com

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline

information go to http://www.supertex.com/packaging.html.)

LP1030D

Doc.# DSFP-LP1030D

A031414

5-Lead SOT-23 Package Outline (K1)

2.90x1.60mm body, 1.45mm height (max), 0.95mm pitch

Symbol

θ1

Dimension

(mm)

MIN 0.90* 0.00 0.90 0.30 2.75* 2.60* 1.45*

0.95

BSC

1.90

BSC

0.30

0.60

REF

0.25

BSC

NOM

1.15

2.90 2.80 1.60

0.45

10O

MAX 1.45 0.15 1.30 0.50 3.05* 3.00* 1.75*

0.60

15O

JEDEC Registration MO-178, Variation AA, Issue C, Feb. 2000.

* This dimension is not specified in the JEDEC drawing.

Drawings not to scale.

Supertex Doc. #: DSPD-5SOT23K1, Version A041309.

Seating

Plane

Gauge

Plane

Top View

Side View

View A - A

View B

θ1

E1 E

A A2

Seating

Plane

Note 1

(Index Area

D/2 x E/2)

Note:

A Pin 1 identifier must be located in the index area indicated. The Pin 1 identifier can be: a molded mark/identifier; an embedded metal marker; or

a printed indicator.

LP1030D bảng dữ liệu(PDF) 3 Page - Supertex, Inc

LP1030D bảng dữ liệu(HTML) 3 Page - Supertex, Inc

Html Pages

1 2 3

bảng dữ liệu tải về

Link URL