03 | Keysight | E6567F cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager - Technical Overview

1xEV-DO transmitter test

(Applies to Release 0, A, and B)

– Waveform quality

– Code domain accuracy

– Transmitter spurious emissions

– Data, RRI, DRC, and ACK channel output power

– Maximum output power

– Access probe open loop power

– Minimum controlled output power

– Closed loop power control

– Time response for open loop power control

1xEV-DO receiver tests

(Applies to Release 0, A, and B)

– Traffic channel PER with AWGN

– Receiver sensitivity and dynamic range

General tests

– Current drain

– Start loop

– End loop

– Send/Receive GPIB command

– Data analyzer

– Send/Receive DUT command

– Keysight 14565B device characterization software control

Hardware Supported

Test instruments

– E7515A UXM wireless communications test set

– E7530A LTE test application and E7630A LTE lab application

– Keysight 8960 Series 10 wireless communications test set

– E5515E or E5515C mainframe (or equivalent E5515B/T)

with Option 003

– E1962B cdma2000®/IS-95/AMPS mobile test application

(revision B.15.18 or later)

– E1966A 1xEV-DO test application (revision A.10.18 or

later)

– E1987A GSM/GPRS/EGPRS, AMPS/136, cdma2000,

1xEV-DO, W-CDMA fast switching mobile test application

(revision A.09.21 or later)

– Keysight 66311B, 66319B, and 66321B power supplies

– Keysight 34970A with 34901A, 34903A, and 34907A data

acquisition/switch unit

Fixtures

Tescom TC-5941, TC-5942, and TC-5952B

Adapters

– Keysight 82357A USB/GPIB interface

– National Instruments GPIB-USB-A external controller

PC cards

– Keysight GPIB

– National Instruments GPIB

– Advantech PCI 1750 E6567F-1TP

– Control RocketPort 95870-3 and 99096-3 multi-port

serial card

Peripherals

– Symbol LS-1220-1200A fixed bar code reader

– Symbol LS-3603MX-1200A, P300FZY, and LS40041-I100

handheld bar code reader

– HP printers

– Epson TM-U200D and TM-U200D strip printer

PC requirements

– Operating system: Microsoft Windows 7 Professional and

Enterprise

– Microsoft Visual Studio.NET

– Microsoft Internet Explorer Version 6.0 or later

– 600 MHz Pentium III or higher (1 GHz Pentium III or higher for

extended capability)

– 512 MB RAM minimum (1024 MB is recommended for normal

development and is required for extended capability operation)

– 200 MB free hard drive space

– CD-ROM

– GPIB card or converter with VISA drives (one per test system)

– LAN port for remote control of UXM

– Serial ports for fixtures, device control, and bar code reader

Order Information

– E6567F cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager

– E6567F-1TP transportable perpetual license, development, and

run time version for E6567F

– E6569F Wireless Test Manager suite, including E6567F and

E6568F

– E6569F-1TP transportable perpetual license, development, and

run time version for E6567F and E6568F

– E6571F Wireless Test Manager run-time license

– E6571F-1TP transportable perpetual license, run time only ver-

sion for both E6567F and E6568F

– E6567FU upgrade existing E6567x to E6567F

– E6567FU-1TP transportable perpetual license, development, and

run time version for E6567x upgrade to E6567F

– E6571FU upgrade existing E6571x to E6571F

– E6571FU-1TP transportable perpetual license, run time only

version for upgrade E6567x and E6568X to E6567F and E6568F

respectively