CONNECTOR

NEW

MB-0187-3

December 2014

JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.

1/10

COMPONENTS PRODUCT INFORMATION

No. of Contacts: 5 positions

Contact Resistance:

30m ohm max. (initial)

Dielectric Withstanding Voltage:

AC500Vrms per minute

Insulation Resistance: 1000M ohm (initial)

Rated Current: DC1.8A (Vbus, GND)

Others DC0.5A

Rated Voltage: AC30Vrms

Durability: 10,000 mating cycles

Operating temperature:

-30 Deg. C to +80 Deg. C

USB 2.0 Compatible Micro Connectors

On-board Type

Mid-mount Type

The DX4 Series is a set of connectors compatible with the Micro-USB type USB 2.0 for

small devices standardized by the USB Implementers Forum, Inc.

Compatible with Universal Serial Bus Micro-USB Cables and Connectors Specification,

Revision 1.01.

Connector type: USB 2.0 compatible, Micro types

Au plating over Pd-Ni alloy is used for mating cycle durability and long product life.

Superior rigidity with high-strength stainless steel shell.

Available in a variety of versions to suit diverse device configurations.

Two-piece shell structure for mid-mount type to prevent contact failure due to flux

scattering during reflow.

Available in reinforced type, with reinforcement plate set in mating area to prevent

damage from plug caused by misaligned mating. (Refer to drawing below)

Mating Area Reinforced Type

*In the above drawing the shell is transparent for illustration purposes to show the

reinforcement plate.

Reinforcement plate

of mating area

DX4 Series

RoHS Compliant

Features

General Specifications