ME10

10W-12W Single Output External Power

Medical Series

www.slpower.com

ME10 Rev 2.7

02-MAY-16

3

EMI/EMC Compliance

Conducted Emissions:

EN55011/CISPR11 Class B, FCC Part 15.107, Class B: 6db margin typ, at 115 and 230Vac

Radiated Emissions:

EN55011/CISPR11 Class B, FCC Part 15.109, Class B: 3db margin typ, at 115 and 230Vac

Common Mode Noise:

High Frequency (100kHz-20MHz): <40mA pk-pk

Electro-Static Discharge (ESD)

Immunity on Power ports:

EN55024/IEC61000-4-2, Level 4: +/- 8kV contact, +/- 15kV air, Criteria A

IEC60601-1-2, 4

Radiated RF EM Fields Susceptibility

EN55022/EN61000-4-3, 10V/m, 80MHz-2.7GHz, 80% AM at 1kHz

IEC60601-1-2, 4

Electrical Fast Transients (EFT) /Bursts:

EN55024/IEC61000-4-4, Level 4, +/- 4.4kV, 100Khz rep rate, 40A, Criteria A

IEC60601-1-2, 4

Surges, Line to Line (Diff Mode) and Line

to GND (CMN Mode)

EN55024/IEC61000-4-5, Level 4, +/-2kV DM, +/-4kV CM, Criteria A

Surpasses IEC60601-1-2, 4

Conducted Disturbances induced by RF

Fields

EN55022/IEC61000-4-6, 3.6V/m – Level 4, 0.15 to 80Mhz; and 12V/m) in ISM and amateur

radio bands between 0.15Mhz and 80Mhz, 80% AM at 1KHz

IEC60601-1-2, 4

Rated Power frequency magnetic fields

EN55024/IEC1000-4-8, Level 4: 30 A/m, 50/60 Hz

IEC60601-1-2, 4th Edition, Table 4

Voltage Interruptions, Dips, Sags &

Surges

EN55024/IECEN61000-4-11: --100% dip for 10 mS, at 0, 45, 90, 135, 180, 225,

270 and 315 degrees, 100% dip for 20mS, 0 deg., Criteria A

--100% dip for 5000mS (250/300 cycles), Criteria B

--60% dip for 100mS, Criteria B

--30% dip for 500mS, Criteria A

IEC60601-1-2, 4th Edition, Table 5

Harmonic Current Emissions

EN55011/EN61000-3-2, Class A

Flicker Test

EN61000-3-3

All specifications are typical at nominal input, full load, at 25

°C ambient unless noted. Consult factory for information regarding testing for or usage under special

environments.

Mechanical Drawing

IEC60320 C14 Receptacle, 2.5 x 5.5 x 9.5mm Barrel Connector

Interchangeable N.A. Blade, 2.5 x 5.5 x 9.5mm barrel connector

Notes:

1. All dimensions in mm.

2. Weight = 110g

2. Interchangeable blade models come with North American blade fitted. For other blades (EU, UK, Aust.) order blade kit KT1027K.

3. The unit should not be covered or enclosed to protect against excessive case temperature rise.