NPS40-M Series Data Sheet

WORLDWIDE OFFICES

Americas

2900 S.Diablo Way

Tempe, AZ 85282

USA

+1 888 412 7832

Europe (UK)

Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX

United Kingdom

+44 (0) 1384 842 211

Asia (HK)

14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon

Hong Kong

+852 2176 3333

Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and

service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names,

trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc.

All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal.

www.artesyn.com

NPS40-M DS 21Mar2016

Ordering Information

Model Number Output Voltage Minimum

Load

Maximum Load with

Convection Cooling

Maximum Load with

200LFM Forced Air

Ripple

NPS42-M

5 V

0 A

8 A

11 A

13 A

± 2%

50 mV

NPS43-M

12 V

0 A

3.75 A

5 A

5.5 A

± 2%

120 mV

NPS44-M

15 V

0 A

3 A

4 A

4.4 A

± 2%

150 mV

NPS45-M

24 V

0 A

1.9 A

2.5 A

2.75 A

± 2%

240 mV

NPS48-M

48 V

0 A

0.94 A

1.25 A

1.38 A

± 2%

480 mV

Pin Assignments

Connector

NPS42-M

NPS43-M

NPS44-M

NPS45-M

NPS48-M

SK1-1

Line

Line

Line

Line

Line

SK1-3

Neutral

Neutral

Neutral

Neutral

Neutral

CN1

Ground

Ground

Ground

Ground

Ground

SK2-1

+5 V

+12 V

+15 V

+24 V

+48 V

SK2-2

+5 V

+12 V

+15 V

+24 V

+48 V

SK2-3

Common

Common

Common

Common

Common

SK2-4

Common

Common

Common

Common

Common

SK2-5

-Sense

-Sense

-Sense

-Sense

-Sense

SK2-6

+Sense

+Sense

+Sense

+Sense

+Sense

Mating Connectors

AC Input

Molex 09-50-8031 (USA)

09-91-0300 (UK)

PINS: 08-52-0113

DC Outputs

Molex 09-50-8061 (USA)

09-93-0600 (UK)

PINS: 08-52-0113

Artesyn Embedded Technologies Connector Kit #70-841-006, includes

all of the above

Notes:

1. Specifications subject to change without notice.

2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5mm)

3. Mounting holes M1 and M2 should be grounded for EMI

purposes.

4. Mounting hole M1 is safety ground connection.

5. Specifications are for convection rating at factory settings at 115

VAC input, 25 °C unless otherwise stated.

6. For DC input an external DC safety rated fuse must be used

7. Warranty: 2 year

8. Weight: 0.26lbs/0.118kg

1. Peak current lasting < 15 seconds with a maximum 10% duty cycle.

2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.

3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.

4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as

a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System

Integrators, including through Distribution Channels. It is not intended for sale to End Users.