MCS3142 datasheet(44/57 Pages) MICROCHIP

44 / 57 page

PC Application

 2014 Microchip Technology Inc.

DS40001746A-page 43

8.7

RECEIVER SETTINGS

The receiver settings can manipulated via the GUI. To access these options, navigate

to Settings->Board Options to see a similar screen as below:

FIGURE 8-11:

BOARD SETTINGS DIALOG

The drop-down options for the center frequency contain common settings for the

receiver. The Hex input box provides a convenient way to visual the decimal frequency

in a hexadecimal format. The modulation can also be configured between OOK and

FSK. When satisfied, press the Program Receiver button to apply the changes to the

board. The kits come with a receiver that has a matching circuit that is designed to a

specific frequency. Changing the frequency far from its originally designed center

frequency will have adverse affects on the receiving range.

8.8

VERSIONING

It is advised that the latest PC application and Host/Target firmware be downloaded

from the web at www.microchip.com/keeloq. The Help window will list the firmware of

the development board and of the application.

References

1. AN1265 – KEELOQ® with AES Microcontroller-Based Code Hopping Encoder

2. DS41646 – Wireless Security Remote Control Development Kit User’s Guide

3. MCS3142 Dual KEELOQ® Encoder Data sheet

4. DS41378 – KEELOQ 3 Development Kit

Note: These settings will not persist between power cycles of the demo board.

MCS3142 bảng dữ liệu(PDF) 44 Page - Microchip Technology