LMV301 datasheet(5/19 Pages) NSC

5 / 19 page

5V AC Electrical Characteristics Unless otherwise specified, all limits guaranteed for T

J = 25˚C. V

+ =

5V, V

− = 0V, V

CM =V

+/2, V

O = 2.5V and RL > 1MΩ. Boldface limits apply at the temperature extremes.

Symbol

Parameter

Condition

Typ

(Note 4)

Units

Slew Rate

(Note 6)

0.66

V/µs

GBW

Gain Bandwidth Product

MHz

φm

Phase Margin

Deg

Gain Margin

Input-Referred Voltage

Noise

f = 1kHz, V

CM =1V

f = 100kHz

nV/

THD

Total Harmonic Distortion

f = 1kHz, A

V =+1

L = 600Ω,VO =1VPP

0.069

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.

Note 2: Applies to both single supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed

junction temperature of 150˚C. Output currents in excess of 45mA over long term may adversely affect reliability.

Note 3: The maximum power dissipation is a function of TJ(MAX), θJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD =

(TJ(MAX) –TA)θJA. All numbers apply for packages soldered directly into a PC board.

Note 4: Typical value represent the most likely parametric norm.

Note 5: All limits are guaranteed by testing or statistical analysis.

Note 6: V+ = 5V. Connected as voltage follower with 5V step input. Number specified is the slower of the positive and negative slew rates.

Note 7: Human body model, 1.5k

Ω in series with 100pF. Machine model, 200Ω in series with 100pF.

Simplified Schematic

20019302

LMV301 bảng dữ liệu(PDF) 5 Page - National Semiconductor (TI)

LMV301 bảng dữ liệu(HTML) 5 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

bảng dữ liệu tải về

Link URL