SLX-5MS Industrial Ethernet Switch Specifications

RECOMMENDED WIRING CLEARANCE

Front: 4” (10.2 cm)

Top: 4” (10.2 cm)

ENVIRONMENTAL

Operating Temperature: -40°C to 75°C

Storage Temperature: -40°C to 85°C

Operating Humidity: 5% to 95% (non condensing)

Operating Altitude: 0 to 30,000 ft.

Shock and Vibration: IEC 60068-2-6, -27

CERTIFICATION & COMPLIANCE

Electrical Safety: UL508/CSA C22.2/142; IEC61010-1, CE

EMI Emissions: FCC part 15, ICES-003; EN61000-6-4, CE

EMC Immunity: EN61000-6-2, CE

Hazardous Locations: ANSI/ISA 12.12.01, CSA C22.2/213 (Class 1,

Division 2); EN60079-0, -15 (zone 2; category 3), CE (ATEX)

Marine: Offshore rated per ABS

Eye Safety (Fiber Models): IEC60825-1, Class 1; FDA 21 CFR 1040.10

and 1040.11

MECHANICAL

Case Dimensions:

Height: 4.7” (11.94 cm)

Width: 1.07” (2.71 cm)

Depth: 3.82” (9.70 cm)

Weight: 8 oz (0.23 kg)

Mount: DIN rail (35 mm) and panel mount

WARRANTY

5 Years on Design and Manufacturing Defects

SWITCH PROPERTIES

Operation: Managed

Number of MAC Addresses: 2048

IEEE Compliance: 802.3, 802.3u, 802.3x, 802.1D/w,

802.1p and 802.1Q

Industrial Connectivity: Modbus registers for port,

power and ring status

Latency (Typical): 5 μs + frame time

Switching Method: Store-and-Forward

LED Status Indicators

Configurable Alarm Contact

Supports Full/Half Duplex Operation

Ethernet isolation 1500 VRMS 1 minute

Maximum Throughput: 1 Gb/s

MDIX Auto Sensing Cable

Auto Sensing Speed and Flow Control

Communications: Full Wire Speed

MTBF: > 2M hours GB @ 40°C per MIL HNDBK-217F2

POWER INPUT

Input Voltage Range: Dual 10-30 VDC power inputs

Input Power (Max): 7 W

Input Power (Typical):

3.6 W (without fiber)

5.6 W (with fiber)

Transient Protection (Peak): 15,000 watts

Spike Protection: 5,000 watts (10 times for 10 us)

CONNECTORS

10/100Base-T: Up to five (5) RJ-45 ports

100Base-FX: Up to two (2) ST or SC duplex fiber ports

Configuration Port: One (1) RS-232 (RJ-45) and one (1) USB (mini)

NETWORK MEDIA

10BaseT: ≥ Cat3 cable

100BaseTX: ≥ Cat5 cable

100Base-FX Multimode: 50-62.5/125 μm

100Base-FX Singlemode: 9-10/125 μm

DIMENSIONS in inches (mm)