OPA452, 453

2

SBOS127C

www.ti.com

Supply Voltage, V+ to V– ................................................................... 80V

Output Short-Circuit ................................................................. Continuous

Operating Temperature .................................................. –55

°C to +125°C

Storage Temperature ..................................................... –65

°C to +150°C

Junction Temperature .................................................................... +150

°C

Lead Temperature (soldering 10s, TO-220) ................................... 300

°C

(soldering 3s, DDPAK) ..................................... 240

°C

NOTES: (1) Stresses above these ratings may cause permanent damage.

Exposure to absolute maximum conditions for extended periods may degrade

device reliability. (2) Input terminals are diode-clamped to the power-supply

rails. Input signals that can swing more than 0.5V beyond the supply rails

should be current limited to 5mA or less.

PACKAGE/ORDERING INFORMATION

For the most current package and ordering information, see the

Package Option Addendum located at the end of this data

sheet.

ELECTROSTATIC

DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Texas Instru-

ments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling

and installation procedures can cause damage.

ESD damage can range from subtle performance degrada-

tion to complete device failure. Precision integrated circuits

may be more susceptible to damage because very small

parametric changes could cause the device not to meet its

published specifications.