| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MCP1402T-E/OT bảng dữ liệu(PDF) 1 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP1402T-E/OT bảng dữ liệu(HTML) 1 Page - Microchip Technology |
|
1 / 20 page ![]() 2007-2014 Microchip Technology Inc. DS20002052D-page 1 MCP1401/02 Features • High Peak Output Current: 500 mA (typical) • Wide Input Supply Voltage Operating Range: - 4.5V to 18V • Low Shoot-Through/Cross-Conduction Current in Output Stage • High Capacitive Load Drive Capability: - 470 pF in 19 ns (typical) - 1000 pF in 34 ns (typical) • Short Delay Times: 35 ns (typical) • Matched Rise/Fall Times • Low Supply Current: - With Logic ‘1’ Input – 0.85 mA (typical) - With Logic ‘0’ Input – 0.1 mA (typical) • Latch-Up Protected: Will Withstand 500 mA Reverse Current • Logic Input Will Withstand Negative Swing up to 5V • Space-Saving 5-Lead SOT-23 Package Applications • Switch Mode Power Supplies • Pulse Transformer Drive • Line Drivers • Motor and Solenoid Drive General Description The MCP1401/02 are high-speed MOSFET drivers capable of providing 500 mA of peak current. The inverting or non-inverting single channel output is directly controlled from either TTL or CMOS (3V to 18V). These devices also feature low shoot-through current, matched rise/fall times and propagation delays which make them ideal for high switching frequency applications. The MCP1401/02 devices operate from a single 4.5V to 18V power supply and can easily charge and discharge 470 pF gate capacitance in under 19 ns (typical). They provide low enough impedances in both the On and Off states to ensure the MOSFET’s intended state will not be affected, even by large transients. These devices are highly latch-up resistant under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the Ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current being forced back into their outputs. All terminals are fully protected against Electrostatic Discharge (ESD) up to 1 kV (HBM) and 300V (MM). Package Types 4 1 2 3 5 VDD GND IN OUT GND OUT GND MCP1401 MCP1402 SOT-23 Tiny 500 mA, High-Speed Power MOSFET Driver |
Số phần tương tự - MCP1402T-E/OT |
|
Mô tả tương tự - MCP1402T-E/OT |
|
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |