MIC2212-2.9BML datasheet(5/10 Pages) MICREL

tên linh kiện	MIC2212-2.9BML

Giải thích chi tiết về linh kiện	Dual uCap LDO and Power-On Reset

PDF	10 Pages

Scroll/Zoom	100%

nhà sản xuất	MICREL [Micrel Semiconductor]

Trang chủ	http://www.micrel.com

Logo

5 / 10 page

August 2004

M9999-080504

MIC2212

Micrel

Parameter

Conditions

Min

Typ

Max

Units

SET Input

SET Pin Current Source

SET = 0V

0.75

1.25

1.75

µA

SET Pin Threshold Voltage

OR = High

1.25

Notes

Exceeding maximum rating may damage the device.

The device is not guaranteed to work outside its operating rating.

The maximum allowable power dissipation of any T

A (ambient temperature) is (PD(max) = TJ(max) – TA) / θJA. Exceeding the maximum allowable

power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.

Specification for packaged product only.

Minimum input for line regulation test is set to V

OUT + 1V relative to the highest output voltage.

Dropout voltage is defined as the input-to-output differential at which the output voltage drops 2% below its nominal value measured at 1V differen-

tial. For outputs below 2.25V, dropout voltage is the input-to-output voltage differential with the minimum input voltage 2.25V. Minimum input

operating voltage is 2.25V.

MIC2212-2.9BML bảng dữ liệu(PDF) 5 Page - Micrel Semiconductor