PSH Series

http://www.ddknet.co.jp

◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.

　Moreover, the characteristic and the specification of the published product are the reference values.

　Please confirm the content with the latest delivery specifications when you use the product.

Unit：mm

○ Instruction Manual

↑2N (Max.)

→4N (Max.)

↓2N (Max.)

⇒

新

Pull-off Tool

① Insert

② Pull off vertically

↑2N (Max.)

→4N (Max.)

↓2N (Max.)

⇒

新

Pull-off Tool

① Insert

② Pull off vertically

When mating the connector, please insert the connector along the center conductor.

When unmating the connector, please pull off vertically by using below tool

（No.357J-K8024-01）.

　　Excessive torsional mating causes to be broken.

・Allowable cable load at mating

　Do not add the load more than right figure.

○ Reflow Temperature Profile

Pull-off Tool

②Pull off vertically

50

100

150

200

230

260

Pre-heating

150～200℃

60～120sec

230℃ max.

30～35sec

MAX：260℃

Time[sec]

※ Above reflow temperature plofile can be fluctuated by sort of the solder paste. Please test the

soldering temperature beforehand.

※ The temperature is measured at the terminal area.

※ Reflow cycle is up to twice.

5