SS2412

CMOS High Sensitivity Micropower Hall Latch

5

V3.10

Nov 1, 2013

Output Behavior versus Magnetic Pole

DC Operating Parameters TA = -40

Test Conditions (UA)

Test Conditions (SO)

OUT

High

Low

The SOT-23 device is reversed from the UA package. The SOT-23 output transistor will be turned on(drops low) in the presence of a

sufficiently strong North pole magnetic field applied to the marked face and turned off(hoists high) in the presence of a sufficiently

strong South pole magnetic field.

Unique Features

CMOS Hall IC Technology

The chopper stabilized amplifier uses switched capacitor techniques to eliminate the amplifier offset voltage,

which, in bipolar devices, is a major source of temperature sensitive drift. CMOS makes this advanced technique

possible. The CMOS chip is also much smaller than a bipolar chip, allowing very sophisticated circuitry to be

placed in less space. The small chip size also contributes to lower physical stress and less power consumption.

ESD Protection

Human Body Model (HBM) tests according to: Mil. Std. 883F method 3015.7

Parameter

Symbol

Limit Values

Unit

Notes

Min

Max

ESD Voltage

VESD

±4

kV

ESD Precautions

Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro Static

Discharge control procedures whenever handling semiconductor products.