DP8464B datasheet(5/26 Pages) NSC

5 / 26 page

Circuit Operation (Continued)

of a differential comparator with hysteresis and a D flip-flop

The hysteresis for this comparator is externally set via the

Set Hysteresis pin In order to have data out the input am-

plitude must first cross the hysteresis level which will

change the logic level on the D input of the flip-flop The

peak of the input signal will generate a pulse out of the

differentiator and bi-directional one shot This pulse will

clock the new data at the D input through to the output In

this way when the differentiator is responding to noise at

the baseline the output of the D flop is not changing since

the logic level into the D input has not changed The com-

parator circuitry is therefore a gating channel which pre-

vents any noise near the baseline from contaminating the

data The amount of hysteresis is twice the DC voltage on

the Set Hysteresis pin For instance if the voltage on the

Set Hysteresis pin is 03V the differential AC signal across

the Gate Channel Input must be larger than 06V before the

output of the comparator will change states In this case

the hysteresis is 30% of a 2V peak to peak differential sig-

nal at the gate channel input

Connection Diagrams

Dual-In-Line (DIP) Package

TLF5283 – 2

Top View

Order Number DP8464BN-3 or DP8464BN-2

See NS Package N24C

Plastic Chip Carrier (PCC) Package

TLF5283 – 30

Order Number DP8464BV-3 DP8464BV-2 or DP8464BV-1

See NS Package V28A

DP8464B bảng dữ liệu(PDF) 5 Page - National Semiconductor (TI)