LM358ADE4 datasheet(13/41 Pages) TI1

13 / 41 page

LM158, LM158A, LM258, LM258A

LM358, LM358A, LM2904, LM2904V

www.ti.com

SLOS068T – JUNE 1976 – REVISED APRIL 2015

8.3 Feature Description

8.3.1 Unity-Gain Bandwidth

The unity-gain bandwidth is the frequency up to which an amplifier with a unity gain may be operated without

greatly distorting the signal. These devices have a 0.7-MHz unity-gain bandwidth.

8.3.2 Slew Rate

The slew rate is the rate at which an operational amplifier can change its output when there is a change on the

input. These devices have a 0.3-V/

μs slew rate.

8.3.3 Input Common Mode Range

The valid common mode range is from device ground to VCC - 1.5 V (VCC - 2 V across temperature). Inputs may

exceed VCC up to the maximum VCC without device damage. At least one input must be in the valid input

common mode range for output to be correct phase. If both inputs exceed valid range then output phase is

undefined. If either input is less than -0.3 V then input current should be limited to 1mA and output phase is

undefined.

8.4 Device Functional Modes

These devices are powered on when the supply is connected. This device can be operated as a single supply

operational amplifier or dual supply amplifier depending on the application.

Submit Documentation Feedback

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

LM358ADE4 bảng dữ liệu(PDF) 13 Page - Texas Instruments