Table is for reference only. See individual Series' datasheets for specific screening.

non

/eS

/883

pre-cap inspection, Method 2017, 2032

n

n

n

temperature cycle (10 times)

Method 1010, Cond. C, -65°C to +150°C, ambient

n

Method 1010, Cond. B, -55°C to +125°C, ambient

n

constant acceleration

Method 2001, 3000 g

n

Method 2001, 500 g

n

pind, test Method 2020, cond. a

96 hours

n

160 hours

n

Final electrical test, MiL-prF-38534, group a,

Subgroups 1 through 6, -55°C, +25°C, +125°C case

n

Subgroups 1 and 4, +25°C case

n

n

Hermeticity test

n

n

n

n

gross Leak, dip

n

Final visual inspection, Method 2009

n

n

n

Test methods are referenced to MIL-STd-883 as determined by MIL-PRF-38534.

Notes

1. Standard and ES are non-QML products and may not meet all of the requirements of MIL-PRF-38534.

2. all processes are QML qualified and performed by certified operators.

3. Not required by dLa but performed to assure product quality.

4. Burn-in temperature designed to bring the case temperature to +125°C minimum.

Burn-in is a powered test.

MFL single and dual dc-dc converters

MFL Single and dual, MFL Rev ad - 2016.02.19. This revision supersedes all previous releases. all technical information is believed to be

accurate, but no responsibility is assumed for errors or omissions. Crane Electronics, Inc. reserves the right to make changes in products or

specifications without notice. Interpoint is a registered trademark of Crane Co. MFL Series is a trademark of Crane Electronics, Inc. Copyright ©

1999 - 2016 Crane Electronics, Inc. all rights reserved. www.craneae.com/interpoint

Page 14 of 14

28 VoLt input - 65 Watt

Crane Aerospace & Electronics Power Solutions