PD166031AT1U

3. Specification

R07DS1308EJ0100 Rev.1.00

Page 29 of 39

Oct. 30, 2015

3.6.8 Nominal load

Product

Nominal load

NHS010A

2.0



3.6.9 Driving Capability

Driving Capability is specified as load impedance. Over current detection characteristics is designed above Driving

Capability characteristics. If estimated load impedance which comes from peak inrush current is lower than Driving

Capability characteristics, this means, the device does not detect inrush current as over current and does not shutdown

the output. Depend on the conditions, Power Limitation function may work during inrush current. If estimated load

impedance which comes from peak inrush current is lower than Driving Capability characteristics, Power limitation

disappear within 30ms. This parameter does not mean that the device can drive the resistive load up to Driving

Capability characteristics.

Driving Capability:

NHS010A:118m

Von [V]

IL [A]

13.5

115

5

IL(SC) characteristics

IL(SC) specified point

NHS010A: 72A

t

t

VIN

IL

30ms