MB9B560R datasheet(9/181 Pages) SPANSION

9 / 181 page

D a t a S h e e t

MB9B560R_DS709-00001-2v0-E, February 2, 2015

CONFIDENTIAL

DSTC (Descriptor System data Transfer Controller) (128 channels)

The DSTC can transfer data at high-speed without going via the CPU. The DSTC adopts the Descriptor

system and, following the specified contents of the Descriptor which has already been constructed on the

memory, can access directly the memory /peripheral device and performs the data transfer operation.

It supports the software activation, the hardware activation and the chain activation functions.

A/D Converter (Max 24 channels)

[12-bit A/D Converter]

 Successive Approximation type

 Built-in 3 units

 Conversion time: 0.5 μs @ 5 V

 Priority conversion available (priority at 2levels)

 Scanning conversion mode

 Built-in FIFO for conversion data storage (for SCAN conversion: 16steps, for Priority conversion: 4steps)

DA Converter (Max two channels)

 R-2R type

 12-bit resolution

Base Timer (Max eight channels)

Operation mode is selectable from the followings for each channel.

 16-bit PWM timer

 16-bit PPG timer

 16-/32-bit reload timer

 16-/32-bit PWC timer

General Purpose I/O Port

This series can use its pins as general purpose I/O ports when they are not used for external bus or

peripherals. Moreover, the port relocate function is built in. It can set which I/O port the peripheral function

can be allocated.

 Capable of pull-up control per pin

 Capable of reading pin level directly

 Built-in the port relocate function

 Up to 100 high-speed general-purpose I/O ports @ 120 pin Package

 Some pin is 5 V tolerant I/O.

See 6. Pin Description and 7. I/O Circuit Type for the corresponding pins.

MB9B560R bảng dữ liệu(PDF) 9 Page - SPANSION