MB9BF412R datasheet(70/121 Pages) SPANSION

70 / 121 page

D a t a S h e e t

March 11, 2015, MB9B410R-DS706-00026-3v0-E

CONFIDENTIAL

*7:

・

See "■ List of Pin Functions" and "■ I/O Circuit Type" about +B input available pin.

・

Use within recommended operating conditions.

・

Use at DC voltage (current) the +B input.

・

The +B signal should always be applied a limiting resistance placed between the +B signal and the device.

・

The value of the limiting resistance should be set so that when the +B signal is applied the input current to

the device pin does not exceed rated values, either instantaneously or for prolonged periods.

・

Note that when the device drive current is low, such as in the low-power consumpsion modes, the +B input

potential may pass through the protective diode and increase the potential at the VCC and AVCC pin, and

this may affect other devices.

・

Note that if a +B signal is input when the device power supply is off (not fixed at 0V), the power supply is

provided from the pins, so that incomplete operation may result.

・

The following is a recommended circuit example (I/O equivalent circuit).

Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature,

etc.) in excess of absolute maximum ratings. Do not exceed these ratings.

+B input (0V to 16V)

Protection Diode

P-ch

VCC

Limiting

resistor

N-ch

AVCC

Analog input

Digital input

Digital output

MB9BF412R bảng dữ liệu(PDF) 70 Page - SPANSION