B94

BPrecautions

1.Recommended soldering

condition

2.Cleaning condition

3.Connecting condition

Flow: 250ç for 3 seconds

Manual soldering: 290ç for 2 seconds

sAfter soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding

member will be loosened. After soldering, the operation should be performed, after connector returns to room

temperature.

Refer to the "Nylon Connector Use Hand book".

Don't use solvent to degrade the cable jacket like trichloroethane.

In addition, avoid heat cleaning with solvent.

Refer to the "Nylon Connector Use Hand book".