Filename: TFS96C.doc

Version 1.2

20.05.2011

Vectron International

Filter specification

TFS 96C

3/5

Vectron International GmbH & Co. KG

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail:

tft@vectron.com

Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without

notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such

product(s) or information.

Stability characteristics, reliability

After the following tests the filter shall meet the whole specification:

1. Shock:

500g, 1 ms, half sine wave, 3 shocks each plane;

DIN IEC 68 T2 - 27

2. Vibration:

10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes;

DIN IEC 68 T2 - 6

3. Change of

temperature:

-55 °C to 125°C / 30 min. each / 10 cycles

DIN IEC 68 part 2 – 14 Test N

4. Resistance to

solder heat (reflow):

reflow possible: three times max.;

for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;

This filter is RoHS compliant (2002/95/EG, 2005/618/EG)