SAFC504 datasheet(49/71 Pages) INFINEON

49 / 71 page

C504

Data Sheet

2000-05

Parameter Interpretation

The parameters listed in the following partly represent the characteristics of the C504

and partly its demands on the system. To aid in interpreting the parameters right, when

evaluating them for a design, they are marked in column “Symbol”:

CC (Controller Characteristics):

The logic of the C504 will provide signals with the respective characteristics.

SR (System Requirement):

The external system must provide signals with the respective characteristics to the

C504.

DC Characteristics

(Operating Conditions apply)

Parameter

Symbol

Limit Values

Unit Test Condition

min.

max.

Input low voltage

(except EA, RESET,

CTRAP)

SR – 0.5

0.2

– 0.1

V–

Input low voltage (EA)

IL1

SR – 0.5

0.2

– 0.3

V–

Input low voltage

(RESET, CTRAP)

IL2

SR – 0.5

0.2

DD +

0.1

V–

Input high voltage

(except XTAL1, RESET and

CTRAP)

SR 0.2

DD +

0.9

DD + 0.5

11)

Input high voltage to XTAL1

IH1

SR 0.7

DD + 0.5

–

Input high voltage to

RESET and CTRAP

IH2

SR 0.6

DD + 0.5

–

Output low voltage

(Ports 1, 2, 3, COUT3)

CC –

0.45

OL =1.6 mA

Output low voltage

(Port 0, ALE, PSEN)

OL1

CC –

0.45

OL =3.2 mA

Output high voltage

(Ports 1, 2, 3)

CC 2.4

0.9

–

OH =– 80 µA

OH =– 10 µA

Output high voltage

(Ports 1, 3 pins in push-pull

mode and COUT3)

OH1

CC 0.9

–V

OH =– 800 µA

SAFC504 bảng dữ liệu(PDF) 49 Page - Infineon Technologies AG

SAFC504 bảng dữ liệu(HTML) 49 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

bảng dữ liệu tải về

Link URL