| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ACT8941A bảng dữ liệu(PDF) 26 Page - Active-Semi, Inc |
|
|
|||||||||||||||||||||||||||||
ACT8941A bảng dữ liệu(HTML) 26 Page - Active-Semi, Inc |
|
26 / 42 page ![]() ACT8941A Rev 0, 12-Mar-13 - 26 - www.active-semi.com ActivePMU TM and ActivePathTM are trademarks of Active-Semi. I2CTM is a trademark of NXP. Copyright © 2013 Active-Semi, Inc. Innovative PowerTM Active-Semi Proprietary―For Authorized Recipients and Customers SYSTEM CONTROL INFORMATION The ACT8941A is optimized for use in applications using the Rockchip RK2906/RK2918 processors, supporting both the power domains as well as the signal interface for these processors. While the ACT8941A supports many possible configurations for powering a processors, one of the most common configurations is detailed in this datasheet. In general, this document refers to the ACT8941A pin names and functions. However, in cases where the description of interconnections between these devices benefits by doing so, both the ACT8941A pin names and the Rockchip RK2906/RK2918 processor pin names are provided. When this is done, the Rockchip RK2906/RK2918 pin names are located after the ACT8941A pin names, and are italicized and located inside parentheses. For example, OUT1 (IO) refers to ACT8941A's OUT1 pin, identifying that it is connected to the Rockchip RK2906/RK2918’s IO power domain. Interfacing with the Rockchip RK2906/RK2918 Processor Table 3: ACT8941A and Rockchip RK2906/RK2918 Power Modes Table 2: ACT8941A and Rockchip RK2906/RK2918 Power Domains POWER DOMAIN ACT8941A CHANNEL TYPE DEFAULT VOLTAGE CURRENT CAPABILITY IO, GSensor, NandFlash, USB_Host11, TP VCC, CODEC_3.0V, Camera IO etc. REG1 DC/DC 3.0V 1100mA DDR3 REG2 DC/DC 1.5V 1100mA Core REG3 DC/DC 1.2V 1200mA ARM_PLL_2.5V, USB_PHY_2.5V, RK2918_SAR-ADC_2.5V REG4 LDO 2.5V 320mA VCC_SD REG6 LDO 3.0V 320mA LCD_VCC REG7 LDO 3.0V 320mA Camera_1.8V REG5 LDO 1.8V 320mA POWER MODE CONTROL STATE POWER DOMAIN STATE QUIESCENT CURRENT NORMAL PWRHLD is asserted REG1, REG2, REG3, REG4, REG5, REG6 and REG7 are on. 420µA SYSTEM OFF PWRHLD is de-asserted. REG1, REG2, REG3, REG4, REG5, REG6 and REG7 are all off. <18µA Table 4: ACT8941A and RK2906/RK2918 Signal Interface ACT8941A DIRECTION RK2906/RK2918 SCL I2C3_SCL SDA I2C3_SDA VSEL GPIO4_D0 nRSTO NPOR nIRQ BAT_LOW nPBSTAT Power_KEY PWRHLD Power_ON |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |