R6986TR datasheet(15/62 Pages) STMICROELECTRONICS

tên linh kiện	R6986TR

Giải thích chi tiết về linh kiện	38 V, 2 A synchronous step-down switching regulator

PDF	62 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

15 / 62 page

DocID026996 Rev 2

15/62

R6986

Functional description

Figure 3. Internal block diagram

5.1

Power supply and voltage reference

The internal regulator block consists of a start-up circuit, the voltage pre-regulator that

provides current to all the blocks and the bandgap voltage reference. The starter supplies

the startup current when the input voltage goes high and the device is enabled (SS/INH pin

over the inhibits threshold).

The pre-regulator block supplies the bandgap cell and the rest of the circuitry with

a regulated voltage that has a very low supply voltage noise sensitivity.

Switchover feature

The switchover scheme of the pre-regulator block features to derive the main contribution of

the supply current for the internal circuitry from an external voltage (3 V < VBIAS < 5.5 V is

typically connected to the regulated output voltage). This helps to decrease the equivalent

quiescent current seen at VIN. (please refer to Section 5.6: Switchover feature on page 28).

R6986TR bảng dữ liệu(PDF) 15 Page - STMicroelectronics