A6986F datasheet(46/72 Pages) STMICROELECTRONICS

46 / 72 page

Application notes

A6986F

46/72

DocID027739 Rev 1

7.4

Voltage supervisor

The embedded voltage supervisor (composed of the RST and the DELAY pins) monitors the

regulated output voltage and keeps the RST open collector output in low impedance as long

as the VOUT is out of regulation. In order to ensure a proper reset of digital devices with

a valid power supply, the device can delay the RST assertion with a programmable time.

Figure 37. Voltage supervisor operation

The comparator monitoring the FB voltage has four different programmable thresholds

(80%, 87%, 93%, 96% nominal output voltage) for high flexibility (see Section 7.3: MLF pin

on page 45, Table 7 on page 11, Table 8 on page 12, and Table 9 on page 12).

When the RST comparator detects the output voltage is in regulation, a 2

A internal current

source starts to charge an external capacitor to implement a voltage ramp on the DELAY

pin. The RST open collector is then released as soon as VDELAY = 1.234 V (see Figure 37).

The CDELAY is dimensioned accordingly with Equation 42:

Equation 42

The maximum suggested capacitor value is 270 nF.

CDELAY

ISSCH TDELAY



VDELAY

------------------------------------------

AT

DELAY



1.234V

-------------------------------------

A6986F bảng dữ liệu(PDF) 46 Page - STMicroelectronics