| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
UPD1002 bảng dữ liệu(PDF) 15 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UPD1002 bảng dữ liệu(HTML) 15 Page - Microchip Technology |
|
15 / 46 page ![]() 2014 Microchip Technology Inc. DS00001760B-page 15 UPD1002 Charger Cur- rent Monitor IMON AI Voltage representation of the charger current. This signal should be fed by a current sense amplifier tuned to output 3.0 V when 6.0 A is flowing on VBUS. Voltage must not exceed 5 V on this signal. Refer to Section 3.4, "Voltage/ Current Monitors (VMON/IMON)," on page 29 for addi- tional information. Power Supply Fault Indicator FAULT_N OD8 This active low signal can be connected to an external LED or SoC and is used by the device to indicate power supply exceptions/failures as determined by the inte- grated voltage/current monitors. Refer to Section 3.4, "Voltage/Current Monitors (VMON/IMON)," on page 29 for additional information. Fault Input FAULT_IN_N IS This active low signal is asserted by the power supplying device (DC to DC controller or port power controller) to notify the device when a system fault condition has occurred. Typically, this signal is used for overcurrent or overvoltage conditions, but it can be used for any system related failure. This signal should be debounced to 1 ms. Note: The board design must ensure this signal is in a valid state by the time PPC_PWR_EN or PD_GOOD asserts. Power Deliv- ery Profile Configuration Selector 0 CFG_SEL0 AIO This pin is used in conjunction with CFG_SEL1 to select the power delivery profile of the device via an externally connected RC circuit. Refer to Section 3.3, "Configuration Selection (CFG_SEL0/CFG_SEL1)" for additional infor- mation. Power Deliv- ery Profile Configuration Selector 1 CFG_SEL1 AIO This pin is used in conjunction with CFG_SEL0 to select the power delivery profile of the device via an externally connected RC circuit. Refer to Section 3.3, "Configuration Selection (CFG_SEL0/CFG_SEL1)" for additional infor- mation. TABLE 2-2: PIN DESCRIPTIONS (CONTINUED) Name Symbol Buffer Type Description |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |