CAP1106 datasheet(26/48 Pages) MICROCHIP

26 / 48 page

CAP1106

DS00001624B-page 26

 2015 Microchip Technology Inc.

Bits 3 - 0 - RPT_RATE[3:0] - (default 0100b) Determines the time duration between interrupt assertions when auto

repeat is enabled. The resolution is 35ms the range is from 35ms to 560ms as shown in Table 6-14.

6.9

Sensor Input Configuration 2 Register

Bits 3 - 0 - M_PRESS[3:0] - (default 0111b) - Determines the minimum amount of time that sensor inputs configured to

use auto repeat must detect a sensor pad touch to detect a “press and hold” event. If the sensor input detects a touch

for longer than the M_PRESS[3:0] settings, a “press and hold” event is detected. If a sensor input detects a touch for

less than or equal to the M_PRESS[3:0] settings, a touch event is detected.

The resolution is 35ms the range is from 35ms to 560ms as shown in Table 6-16.

3360ms

3920ms

4480ms

5600ms (default)

6720ms

7840ms

8906ms

10080ms

11200ms

TABLE 6-14:

RPT_RATE BIT DECODE

RPT_RATE[3:0]

Interrupt Repeat RATE

35ms

70ms

105ms

140ms

175ms (default)

210ms

245ms

280ms

315ms

350ms

385ms

420ms

455ms

490ms

525ms

560ms

TABLE 6-15:

SENSOR INPUT CONFIGURATION 2 REGISTER

ADDR

R/W

Default

23h

R/W

Sensor Input

Configuration 2

M_PRESS[3:0]

07h

TABLE 6-13:

MAX_DUR BIT DECODE (CONTINUED)

MAX_DUR[3:0]

Time Before Recalibration

CAP1106 bảng dữ liệu(PDF) 26 Page - Microchip Technology

CAP1106 bảng dữ liệu(HTML) 26 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

bảng dữ liệu tải về

Link URL