MINT1500

500W Single Output

Medical & ITE Series

www.slpower.com

MINT1500 REV 6.0, 12-18-14

7

Internal pull down resistor: 43KΩ to V-.

5.

Remote Sense Output Signal – J2 Pin 1 (+Sense), J2 Pin 2 (-Sense)

Less than 250mV voltage drop compensation due to cable loss on each side of main output. See Figure 3 for wiring connection.

6.

Stand-By Output – J2 Pin5 (+), J2 Pin 4 (–)

The standby output is always available when AC input is present. It is rated for 5V/0.2A.

Data Sheet © 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for

consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.