UNIVERSAL INPUT AC TO DC EXTERNAL DESKTOP ADAPTER

60-65 WATTS SINGLE OUTPUT SWITCHING POWER SUPPLIES

TPES65 SERIES

FEATURES:

ACCOMMODATE UNIVERSAL AC INPUT

DESKTOP IEC320-3PAC RECEPTACLE

MEET UNIVERSAL SAFETY STANDARDS

EMI MEET EN55022 / FCC CLASS B

CE MARKING COMPLIANCE

GENERAL SPECIFICATION

Efficiency: 80% ~ 86% typical.

Switching Frequency: Approximate 85K Hz.

Circuit Topology: Fixed Frequency Flyback circuit.

Transient Response: Output voltage returns in

less than 3mS following a 25% load change.

Safety Standard: UL1950/ EN60950 Class I.

Operating Temperature: 0 to +40°C.

Storage Temperature: -20 to +85°C.

Temperature Coefficient: 0.04% /°C.

Cooling: Free air convection.

Construction: Impact resistant thermo-plastic

enclosure case.

Desktop Format.

Notes: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.

(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (±%).

(3) The typical cord length is about 1 meter (3.3 ft.), AWG#18 cord for various load conditions.

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Wattage: Typical 60 ~ 65W.

Output Connector & Cord: Optional.

Output LED Indicator: Installed.

Line Regulation: 0.1% typical.

Load Regulation: ±3.0 ~ 5.0% typical.

Noise & Ripple: Typ. 1.0% peak to peak.

OVP: Built-in, Zener Diode clamping.

Adjustability: Factory set, not available..

Overload Protection: Typ. 125-150% of max power

overrange or short circuit, power foldback

& self-recovering.

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: 90-264Vac typical.

Input Connector: IEC320 3P-AC inlet receptacle.

Input Frequency: 47 ~ 63Hz.

Inrush Current: Less than 30A by adding thermister.

Input Current: 1.3A @115Vac./0.55A @230Vac typical.

Dielectric Withstand: Meet IEC950.

EMI: Meet EN55022 / FCC Class B.

Hold-up Time: 12mS @115Vac or

75mS @230Vac typical.

Over Temp. Protection (OTP): Optional.

Over Current Protection (OCP): Optional.

TOTAL POWER INT'L