V23832-T2131-M101

V23832-R121-M101

Technical Data

Data Sheet

22

2003-11-19

15)

The DJ consists of Duty Cycle Distortion and Data Dependent Jitter and is measured according to IEEE 802.3

using a K28.5 pattern.

16)

With input channel-to-channel skew 0 ps.

Receiver Electro-Optical Characteristics

Parameter

Symbol

Values

Unit

min.

max.

Data Rate Per Channel

DR

500

1)

1)

Specified for CID worst case pattern (disparity 72) or any pattern with a smaller disparity. The minimum data

rate depends on the disparity of the used data pattern. For example, a regular clock signal (1-0 sequence) can

be received down to a data rate as low as 6 Mbit/s.

1600

Mbit/s

Sensitivity (Average Power)

2)

2)

Sensitivity is measured for BER = 10

test pattern source with RIN of –117 dB/Hz or better. Sensitivity is specified for the worst case extinction ratio

and maximum cross talk possibility. The maximum crosstalk possibility is defined as the “victim” receiver

channel operating at its sensitivity limit and the neighboring channels operating at 6 dB higher incident optical

power.

P

IN

–16.0

dBm

Optical Modulation Amplitude

3)

3)

Peak to peak value.

OMA

0.030

4)

4)

Corresponds to a maximum sensitivity (average power) of –16.0 dBm at an extinction ratio of 6 dB.

mW

Saturation (Average Power)

5)

5)

Saturation is specified with a Pseudo Random Bit sequence of length 2

≥ 6dB.

P

SAT

–2.0

dBm

Signal Detect Assert Level

6)

6)

P

P

P

SDA

–17.0

dBm

Signal Detect Deassert Level

6)

P

SDD

–27.0

dBm

Signal Detect Hysteresis

6)

P

SDA

–

P

SDD

1.0

4.0

dB

Return Loss of Receiver

7)

7)

Return loss is specified as the ration of the received optical power to the reflected optical power back into the

link fiber.

ORL

12

dB

Electro-optical parameters valid for each channel and measured at the highest specified data rate.

All optical parameters are measured with a 62.5 µm multimode fiber.