MN103SFM9K

32-bit Single-chip Microcontroller

Publication date: August 2014

6

PubNo. 232M9-010E

- Resolution

10 bits

- Minimum conversion time

1.0

μsec

- Channels

16 channels (ADIN00, ADIN01, ADIN06 to ADIN19)

- Use of 3 converters allows simultaneous sampling of 3 phases

- A/D conversion start trigger is in synchronization with complementary 3-phase PWM

cycle and 16-bit timer

Complementary 3-phase PWM output

2 channels

- Min. resolution: 33.3 nsec

- Triangular and saw-tooth waves output

- Incorporates a dead time insertion circuit

- Can overwrite registers by double buffer during PWM operation

- PWM output protection circuit supporting external interrupts

- Output timing varying function

Serial Interface

3 channels

Serial 0 (Full duplex UART/synchronous serial interface)

Synchronous serial interface

- Overrun error detection

- Transfer clock source

1/2 and 1/16 of timer 14 underflow, 1/2 and 1/16 of timer 15 underflow,

and 1/2 and 1/16 of timer 16 underflow, SBT0 pin

- Can be selected as the first bit to be transferred,

Any transfer size from 7 to 8 bits can be selected.

- Maximum transfer rate: 3.0 Mbps

Full duplex UART

- Parity error, overrun error, and flaming error detection

- Transfer clock source

1/16 of timer 14 underflow, 1/16 of timer 15 underflow,

and 1/16 of timer 16 underflow,

- Can be selected as the first bit to be transferred,

Any transfer size from 7 to 8 bits can be selected.

- Continuous transmission, reception, and transmission/reception

- Maximum transfer rate: 375 kbps

Serial 1 (Full duplex UART/synchronous serial interface)

Synchronous serial interface

- Overrun error detection

- Transfer clock source

1/2 and 1/16 of timer 14 underflow, 1/2 and 1/16 of timer 15 underflow,

and 1/2 and 1/16 of timer 16 underflow, SBT1 pin

- Can be selected as the first bit to be transferred,

Any transfer size from 7 to 8 bits can be selected.

- Maximum transfer rate: 3.0 Mbps

Full duplex UART

- Parity error, overrun error, and flaming error detection

- Transfer clock source

1/16 of timer 14 underflow, 1/16 of timer 15 underflow,

and 1/16 of timer 16 underflow,

- Can be selected as the first bit to be transferred,

Any transfer size from 7 to 8 bits can be selected.

- Continuous transmission, reception, and transmission/reception

- Maximum transfer rate: 375 kbps

Serial 2 (Full duplex UART/synchronous serial interface)