2

DWT-SJS-TU2-1

DWT-UJS-UV2-1

DWT-CJS-ST2-1

DWT-SJS-UV2-1

DWB-SJS-RS1-1

DWB-UJS-R2S-1

DWB-UJS-S2T-1

DWB-SJS-Q2R-1

True Green, 525nm

True Green, 525nm

True Green, 525nm

True Green, 525nm

Blue, 470nm

Blue, 470nm

Blue, 470nm

Blue, 470nm

120

120

120

120

120

120

120

120

InGaN : DWx

Part Ordering

Number

Color

Viewing

Angle˚

Luminous Intensity @ 30mA IV (mcd)

1350

2000

850

1350

470

600

900

370

Total Flux @ 30mA

mlm (typ)

NOTE

1. All part number above comes in a quantity of 2000 units per reel.

2. Other luminous intensity groups may also be available upon request.

3. Luminous intensity is measured with an accuracy of ± 11%.

4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.

5. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance

current pulsing should is used for dimming purposes.

6. An optional Vf bining is also available upon request. Bining scheme is as per following table.

Not for new design

Min.

Typ.

Max.

285.0

450.0

180.0

450.0

112.5

140.0

224.0

90.0

450.0

715.0

285.0

715.0

140.0

224.0

285.0

140.0

715.0

1125.0

450.0

1125.0

224.0

285.0

450.0

180.0

Typ. (V)

Vf @ If = 30mA

Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V.

Electrical Characteristics at Tj=25˚C

Max. (V)

Min. (V)

Part Number

DWB

DWT

3.4

3.5

5

5

4.0

4.2

Min. (V)

3.05

3.05

Optical Characteristics at Tj=25˚C

DOMINANT

Opto Technologies

Innovating Illumination

TM

28/04/2015 V15.0