LMP8278 datasheet(3/23 Pages) TI

3 / 23 page

LMP8278

www.ti.com

SNAS575A – FEBRUARY 2012 – REVISED MARCH 2013

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1)

ESD Tolerance (2)

Human Body

For input pins only

±8000V

For all other pins

±2000V

Machine Model

200V

Charge Device Model

1000V

Supply Voltage (VS - GND)

Continuous Input Voltage (–IN and +IN) (3)

−12V to 50V

Max Voltage at A1, A2 and OUT

VS +0.3V

Min Voltage at A1, A2 and OUT

GND -0.3V

Storage Temperature Range

−65°C to 150°C

Junction Temperature (4)

150°C

For soldering specs see:

SNOA549C

(1)

“Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of

the device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or

other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating

Conditions indicate conditions at which the device is functional and the device should not be beyond such conditions. All voltages are

measured with respect to the ground pin, unless otherwise specified.

(2)

Human Body Model per MIL-STD-883, Method 3015.7. Machine Model, per JESD22-A115-A. Field-Induced Charge-Device Model, per

JESD22-C101-C.

(3)

For the VSSOP package, the pitch of the solder pads is too narrow for reliable use at higher voltages (VCM >25V). Therefore, it is

strongly advised to add a conformal coating on the PCB assembled with the LMP8278 / LMP8278Q.

(4)

The maximum power dissipation must be derated at elevated temperatures and is dictated by TJ(MAX), θJA, and the ambient temperature,

TA. The maximum allowable power dissipation PDMAX = (TJ(MAX) - TA)/ θJA or the number given in Absolute Maximum Ratings, whichever

is lower.

Operating Ratings

(1)

Supply Voltage (VS – GND)

4.5V to 5.5V

Temperature Range (2)

−40°C to +125°C

Package Thermal Resistance (2)

8-Pin VSSOP (

θJA)

230°C/W

(1)

“Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of

the device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or

other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating

Conditions indicate conditions at which the device is functional and the device should not be beyond such conditions. All voltages are

measured with respect to the ground pin, unless otherwise specified.

(2)

The maximum power dissipation must be derated at elevated temperatures and is dictated by TJ(MAX), θJA, and the ambient temperature,

TA. The maximum allowable power dissipation PDMAX = (TJ(MAX) - TA)/ θJA or the number given in Absolute Maximum Ratings, whichever

is lower.

Submit Documentation Feedback

Product Folder Links: LMP8278

LMP8278 bảng dữ liệu(PDF) 3 Page - Texas Instruments

LMP8278 bảng dữ liệu(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

bảng dữ liệu tải về

Link URL