SP8400KGMPES datasheet(3/6 Pages) MITEL

3 / 6 page

SP8400

APPLICATIONS INFORMATION

Circuit description, synthesiser divider

The divider is based on a divide by 8/9 modulus prescaler,

and a 12 stage control counter. This gives minimum fractional

– N division ratio of 64 (56 for general division), and a maximum

division ratio of 4103. The inputs to the control counter are TTL/

CMOS compatible. There is a fixed offset of 8 between the

number on the data lines and the actual division ratio.

The output is one transition only per divide cycle. This

eliminates the problem of where to put the redundant edge

when the divider is used in a fractional–N system, and also

avoids the problem of how to define the output pulse width. This

means that the overall division ratio conventionally defined in

terms of the rate of edges of the same polarity is twice the

selected division ratio.

Fig.4 Test circuit

SP8400

10nF

1nF

2x330R

1nF

TTL/CMOS

MODULUS

CONTROL

TTL/CMOS

MODULUS

CONTROL

VCC

50R

SIGNAL

GENERATOR

220nF

OUTPUT

Equations for division

The M and A data inputs form a 12 bit number with A0

being the least significant bit and M8 being the most significant

bit.

Definition 1:

Division ratio – (input frequency to output

edges, positive or negative).

= Number loaded + 8

Definition 2:

Division ratio – (input frequency to output

frequency).

= (Number loaded + 8) x 2

SP8400KGMPES bảng dữ liệu(PDF) 3 Page - Mitel Networks Corporation

SP8400KGMPES bảng dữ liệu(HTML) 3 Page - Mitel Networks Corporation

Html Pages

1 2 3 4 5 6

bảng dữ liệu tải về

Link URL