Product Datasheet

www.Applied-Motion.com

HT34-497

NEMA 34 High Torque Step Motor

1pc. - 518.00

50pc. - 388.50

Product Features

2-phase hybrid step motor

High torque design

Standard NEMA 34 dimensions

Optimized for high bus voltage operation

Applied Motion Products, Inc.

404 Westridge Dr.

Watsonville, CA 95076, USA

1-800-525-1609

Tel (831) 761-6555

Fax (831) 761-

6544

Product Description:

The HT34-497 two-phase stepper motor is designed for use with the STAC5 and STAC6 series of stepper drives

and is suitable for a wide range of motion control applications. The motor is optimized for use with high bus-

voltage drives and comes with an integral 10 ft shielded cable.

The motor is terminated with 8 motor leads plus 1 ground lead making it easy to connect the motor to the drive

depending on the drive voltage being used. For 120 VAC applications the motor leads must be connected in

parallel. For 220 VAC applications the motor leads must be connected in series.

Note: The HT34-497 step motor supersedes the HT34-490 step motor in 120 VAC applications with the STAC6

stepper drives.

Please note that a VL series gearhead purchased for this motor will require a special mounting adaptor and 2

weeks lead time. Please contact customer service for the price of this adaptor.

Description