Product Datasheet

www.Applied-Motion.com

HT23-550

NEMA 23 High Torque Step Motor

1pc. - 140.00

50pc. - 105.00

Product Features

2-phase hybrid step motor

High torque design

Standard NEMA 23 dimensions

Optimized for high bus voltage

Applied Motion Products, Inc.

404 Westridge Dr.

Watsonville, CA 95076, USA

1-800-525-1609

Tel (831) 761-6555

Fax (831) 761-

6544

Product Description:

The HT23-550 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC

input versions only) and is suitable for a wide range of motion control applications. The motor comes with an

integral 10 ft shielded cable and a preassembled drive connector for easy connection to a STAC6 drive.

When not used with STAC6 drives, the preassembled drive connector can be removed to reveal 8 motor leads

plus 1 ground lead. The 8 motor leads can be connected in one of three ways to the step motor drive of your

choice: bipolar series (required for STAC6 drives), bipolar parallel, or unipolar.

Note: The HT23-550 step motor has been superseded by theHT23-554 step motor for use in all new applications

with STAC6 stepper drives.

This motor has features which do not conform to standard NEMA for gearhead ordering purposes. Stated lead

time for a gearhead ordered with this motor may be longer than shown. Please call for delivery on a gearhead

being ordered with this motor.

Description