3.3V

2.5V

2.5V

3.3V

2.5V

LM5115A

www.ti.com

SNVS467B – DECEMBER 2006 – REVISED MARCH 2013

Figure 15.

Vphase = 10V

CH1 = Master output, 1V/Div

CH2 = COMP, 5/Div

CH3 = Iout, 1A/Div

CH4 = SSPR Output (Slave), 1V/Div

Horizontal Resolution= 200 µs/Div

Figure 16. Tracking with Equal Soft Start Time

Alternatively, the tracking feature can be used to create equal slew rates between the output voltages of the

master supply and the LM5115A. This method ensures that the output voltage of the LM5115A always reaches

regulation before the output voltage of the master supply. In this case, the tracking resistors can be determined

based on the following equation:

Again, a value of 10k

Ω 1% is recommended for RT2. For the case of VOUT1 = 3.3V and VOUT2 = 2.5V, RT1

should be 4.32 k

Ω 1%. The timing diagram and the waveforms for equal slew rates configuration are shown in

Figure 17 and Figure 18.

Figure 17. Tracking with Equal Slew Rate

Copyright © 2006–2013, Texas Instruments Incorporated

Submit Documentation Feedback

13

Product Folder Links: LM5115A