KAI−04022

www.onsemi.com

21

Table 10. DC BIAS OPERATING CONDITIONS

Description

Symbol

Minimum

Nominal

Maximum

Unit

Maximum

DC Current

Output Gate (Notes 4, 5)

OG

−3.0

−2.0

−1.5

V

1

mA

Reset Drain (Note 4)

RD

11.5

12.0

12.5

V

1

mA

Output Amplifier Supply (Note 3)

14.5

15.0

15.5

V

1 mA

Ground

GND

0.0

0.0

0.0

V

Substrate (Notes 1, 7)

VSUB

8.0

17.0

V

ESD Protection (Note 2)

ESD

−9.5

−9.0

−8.0

V

Output Bias Current (Note 6)

0.0

5.0

10.0

mA

the photodiode charge capacity is 40,000 electrons.

2. VESD must be equal to FDL and more negative than H1L, H2L and RL during sensors operation AND during camera power turn on.

4. May be changed in future versions.

5. Output gate voltage level must be set to –3 V for 40,000 – 80,000 electrons output in summed interlaced or binning modes.

6. One output.

7. Refer to Application Note Using Interline CCD Image Sensors in High Intensity Visible Lighting Conditions.

Figure 18. Output Architecture

Floating

Diffusion

Source

Follower

#1

Source

Follower

#2

Source

Follower

#3