Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.

Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.

MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION

• 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281

www.micropac.com

12/13/01

2

52150/52175

POSITIVE ADJUSTABLE 5-AMP VOLTAGE REGULATOR

ELECTRICAL CHARACTERISTICS

PARAMETER

SYMBOL

TEST CONDITIONS

MIN

TYP

MAX

UNIT

Output Voltage (Note 4)

5.0

24

V

Line Regulation (Note 2)

0.2%

1%

V

Load Regulation (Note 2)

10mA

0.2%

1%

V

Quiescent Current

3.4

10

mA

Ripple Rejection

RR

60

dB

Output Noise

10Hz

≤ f ≤ 100 kHz

50

Dropout Voltage (Note 5)

2.3

2.0

2.5

2.3

V

V

Short-Circuit Current

Limit

7.0

12.0

A

Control Pin Voltage

4.85

5.0

5.25

V

NOTES:

1. This voltage regulator offers output transistor safe-area protection. However, to maintain full protection, the

device must be operated within the maximum input-to-output voltage differential rating listed on the data sheet

under “Absolute Maximum Ratings”. For applications violating these limits, device will not be fully protected.

2. Load and line regulation are specified at constant junction temperature. Pulse testing is required with a pulse

width

≤ 1 ms and a duty cycle ≤ 5%. Full Kelvin connection methods must be used to measure these parameters.

noted.

R2

5. Dropout Voltage is the input-output voltage differential that causes the output voltage to decrease by 5% of its

initial value.