©2014 Glenair, Inc.

REV: C

US Cage Code 06324

Printed in USA

GLENAIR, INC.

∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497

∙ TEL: 818-247-6000

∙ FAX: 818-500-9912

www.glenair.com

PAGE 12 of 16

E-mail: sales@glenair.com

050-331 Product Brief

PC Board Mount Dual-Transmitter

3G-SDI and HD-SDI, MMF, 3.3V

Application Support

To assist in the dual-transmitter design and evaluation process, Glenair offers the following aids:

•

Evaluation board & Product Manual, part number 050-330-MMF-EVALBOARD, which facilitates in the testing of

the board mount dual-transmitter.

•

3D Step file to support modeling of mechanical fit and routing

•

PADS schematic and PCB layout library files that can be exported into customer’s PCB software design program

•

Applications Aid Example of PCB layout including details of high speed transmission designs

Customer Manufacturing Processes

This module is mounted with screws and interfaces with a high-speed low cost surface mount electrical connector residing

on the host PC board. The board mount dual-transmitter is not designed for aqueous wash, IR reflow, or wave soldering

processes and should be mounted on the host board after host PC board has been through its assembly process.