PIC18F010 datasheet(13/176 Pages) MICROCHIP

13 / 176 page

 2001 Microchip Technology Inc.

Preliminary

DS41142A-page 11

PIC18F010/020

2.6.1

OSCILLATOR TRANSITIONS

The PIC18F010/020 devices contain circuitry to pre-

vent "glitches" when switching between oscillator

sources. Essentially, the circuitry waits for eight rising

edges of the clock source that the processor is switch-

ing to. This ensures that the new clock source is stable

and that its pulse width will not be less than the shortest

pulse width of the two clock sources.

A timing diagram, indicating the transition from the inter-

nal oscillator to the external crystal is shown in Figure 2-6.

The internal oscillator is assumed to be running all the

time. After the OST bit is set, the processor is frozen at

the next occurring Q1 cycle. After eight synchronization

cycles are counted from the external oscillator, opera-

tion resumes. No additional delays are required after

the synchronization cycles.

FIGURE 2-6:

TIMING DIAGRAM FOR TRANSITION FROM EXTERNAL OSCILLATOR TO

INTERNAL OSCILLATOR

FIGURE 2-7:

TIMING FOR TRANSITION BETWEEN INTERNAL OSCILLATOR AND OSC1 (EC)

OSC1

Internal

OSTO

(OSCCON<0>)

Program

PC + 2

Note 1: Delay on internal system clock is eight oscillator cycles for synchronization.

INTOSC

PC + 4

Clock

Counter

System

TOSC

5678

Q1 Q2

Q4 Q1

OSC1

Internal System

SCS

(OSCCON<0>)

Program Counter

PC + 2

Note 1:

Internal oscillator mode assumed.

PC + 4

INTOSC

Clock

OSC2

TOSC

PIC18F010 bảng dữ liệu(PDF) 13 Page - Microchip Technology

PIC18F010 bảng dữ liệu(HTML) 13 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL