LPC81XM_15 datasheet(13/77 Pages) PHILIPS

13 / 77 page

LPC81XM

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4.4 — 23 June 2015

13 of 77

NXP Semiconductors

LPC81xM

32-bit ARM Cortex-M0+ microcontroller

Functional description

8.1 ARM Cortex-M0+ core

The ARM Cortex-M0+ core runs at an operating frequency of up to 30 MHz using a

two-stage pipeline. Integrated in the core are the NVIC and Serial Wire Debug with four

breakpoints and two watchpoints. The ARM Cortex-M0+ core supports a single-cycle I/O

enabled port for fast GPIO access.

The core includes a single-cycle multiplier and a system tick timer.

8.2 On-chip flash program memory

The LPC81xM contain up to 16 kB of on-chip flash program memory. The flash memory

supports a 64 Byte page size with page write and erase.

8.3 On-chip SRAM

The LPC81xM contain a total of up to 4 kB on-chip static RAM data memory.

8.4 On-chip ROM

The 8 kB on-chip ROM contains the boot loader and the following Application

Programming Interfaces (API):

• In-System Programming (ISP) and In-Application Programming (IAP) support for flash

programming

• Power profiles for configuring power consumption and PLL settings

• USART driver API routines

• I2C-bus driver API routines

8.5 Nested Vectored Interrupt Controller (NVIC)

The Nested Vectored Interrupt Controller (NVIC) is an integral part of the Cortex-M0+. The

tight coupling to the CPU allows for low interrupt latency and efficient processing of late

arriving interrupts.

8.5.1 Features

• Controls system exceptions and peripheral interrupts.

• On the LPC81xM, the NVIC supports 32 vectored interrupts including up to 8 external

interrupt inputs selectable from all GPIO pins.

• Four programmable interrupt priority levels with hardware priority level masking.

• Software interrupt generation using the ARM exceptions SVCall and PendSV.

• Relocatable interrupt vector table using vector table offset register.

8.5.2 Interrupt sources

Each peripheral device has one interrupt line connected to the NVIC but may have several

interrupt flags. Individual interrupt flags may also represent more than one interrupt

source.

LPC81XM bảng dữ liệu(PDF) 13 Page - NXP Semiconductors

LPC81XM bảng dữ liệu(HTML) 13 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77

bảng dữ liệu tải về

Link URL