S1315 datasheet(13/43 Pages) SII

13 / 43 page

LOW CURRENT CONSUMPTION OUTPUT CAPACITOR-LESS CMOS VOLTAGE REGULATOR

Rev.1.2_00

S-1315 Series

Seiko Instruments Inc.

*1. VOUT(S): Set output voltage

VOUT(E): Actual output voltage

Output voltage when fixing IOUT (= 30 mA) and inputting VOUT(S)

+ 1.0 V

*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.

*3. Vdrop = VIN1

− (VOUT3 × 0.98)

VOUT3 is the output voltage when VIN = VOUT(S)

+ 1.0 V and IOUT = 200 mA.

VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input

voltage.

*4. A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.

ΔVOUT

ΔTa []

mV/°C

*1 = V

OUT(S) []

*2 ×

ΔVOUT

ΔTa•VOUT []

ppm/°C

*3 ÷ 1000

*1. Change in temperature of output voltage

*2. Set output voltage

*3. Output voltage temperature coefficient

*5. The output current can be at least this value.

Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the

power dissipation of the package when the output current is large.

This specification is guaranteed by design.

S1315 bảng dữ liệu(PDF) 13 Page - Seiko Instruments Inc