AFCT-57R5APZ datasheet(5/22 Pages) AVAGO

5 / 22 page

Electromagnetic Interference (EMI)

Equipment incorporating gigabit transceivers is typically

subject to regulation by the FCC in the United States, CEN-

ELEC EN55022 (CISPR 22) in Europe and VCCI in Japan. The

AFBR-57F5PZ’s compliance to these standards is detailed

in Table 1. The metal housing and shielded design of the

AFBR-57F5PZ minimizes the EMI challenge facing the

equipment designer.

EMI Immunity (Susceptibility)

Due to its shielded design, the EMI immunity of the AFBR-

57F5PZ exceeds typical industry standards.

Flammability

The AFBR-57F5PZ optical transceiver is made of metal and

high strength, heat resistant, chemical resistant and UL

94V-0 flame retardant plastic.

Electrostatic Discharge (ESD)

The AFBR-57F5PZ is compatible with ESD levels found in

typical manufacturing and operating environments as de-

scribed in Table 1. In the normal handling and operation

of optical transceivers, ESD is of concern in two circum-

stances.

The first case is during handling of the transceiver prior to

insertion into an SFP compliant cage. To protect the de-

vice, it’s important to use normal ESD handling pre-cau-

tions. These include use of grounded wrist straps, work-

benches and floor wherever a transceiver is handled.

The second case to consider is static discharges to the

exterior of the host equipment chassis after installation.

If the optical interface is exposed to the exterior of host

equipment cabinet, the transceiver may be subject to sys-

tem level ESD requirements.

Table 1. Regulatory Compliance

Feature

Test Method

Performance

Electrostatic Discharge (ESD)

MIL-STD-883C

Class 1 (> 2000 Volts)

to the Electrical Pins

Method 3015.4

Electrostatic Discharge (ESD)

Variation of IEC 61000-4-2

Typically, no damage occurs with 25 kV when

to the Duplex LC Receptacle

the duplex LC connector receptacle is

contacted by a Human Body Model probe.

GR1089

10 contacts of 8 kV on the electrical faceplate

with device inserted into a panel.

Electrostatic Discharge (ESD)

Variation of IEC 801-2

Air discharge of 15 kV (min.) contact to

to the Optical Connector

connector without damage.

Electromagnetic Interference

FCC Class B

System margins are dependent on customer

(EMI)

CENELEC EN55022 Class B

board and chassis design.

(CISPR 22A)

VCCI Class 1

Immunity

Variation of IEC 61000-4-3

Typically shows no measurable effect from a

10 V/m field swept from 10 MHz to 1 GHz.

Laser Eye Safety and

US FDA CDRH AEL Class 1

CDRH certification 9720151-111

Equipment Type Testing

US21 CFR, Subchapter J per

TUV file 72102056

Paragraphs 1002.10

and 1002.12

(IEC) EN60825-1: 1994 + A11 + A2

(IEC) EN60825-2: 1994 + A1

(IEC) EN60950: 1992 + A1 + A2 +

A3 + A4 + A11

Component Recognition

Underwriters Laboratories and

UL file 8543036783

Canadian Standards Association

Joint Component Recognition

for Information Technology

Equipment including Electrical

Business Equipment

RoHS Compliance

Less than 1000 ppm of cadmium, lead, mercury,

hexavalent chromium, polybrominated biphenyls,

and polybrominated biphenyl ethers.

BAUART

GEPRUFT

TYPE

APPROVED

TUV

Rheinland

Product Safety

AFCT-57R5APZ bảng dữ liệu(PDF) 5 Page - AVAGO TECHNOLOGIES LIMITED

AFCT-57R5APZ bảng dữ liệu(HTML) 5 Page - AVAGO TECHNOLOGIES LIMITED

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

bảng dữ liệu tải về

Link URL