Features

14U 14-Slot AdvancedTCA

Reference Systems

ƒ 14U 14-slot 19" rackmount ATCA shelf with integrated switches and server

blades

ƒ 12 node + 2 hub slots with power distribution for over 350W per slot

ƒ 14 rear transition module (RTM) slots

ƒ Supports two redundant Shelf Managers, and two redundant Shelf FRU Data

and Telco Alarms boards

ƒ 40G ATCA-compliant backplane, with dual star topology on fabric channel

and base channel, supporting up to 10 Gbps per differential pair for the fabric

ƒ Redundant AC and DC power options

ƒ Front-to-rear Pull Cooling Mode

ƒ Hot swappable FRUs (blades, RTMs, fan trays, power modules, and ShMM)

ƒ PICMG 3.0 (AdvancedTCA Base Specification) Compliance

Introduction

Advantech’s Netarium™ series of ATCA reference systems are specifically targeted to help network equipment providers reach superior levels of performance over traditional rackmount

servers or appliances and extend their product range at the high end. The series represents a new generation of systems which offer higher performance, greater scalability and extreme

flexibility by using the latest 40 Gigabit Ethernet (40G) backplanes, switches and application blades. Advantech optimizes the systems to achieve the highest possible density at the

rack level, enabling a maximum number of processor cores, network ports and switching capacity.

Each system is tailored for customers to rapidly deploy in data communication markets for applications which require faster and deeper packet processing such as policy and

charging enforcement, network security, real-time traffic monitoring, load balancing, subscriber analytics and content optimization among others. As ATCA was designed to meet the

carrier-grade constraints of the telecom industry, the systems integrate the chassis, cooling, power distribution and shelf management into an off-the-shelf platform solution capable

of superior 5 NINES availability and reliability.

Rising volumes of data traffic, media-rich applications and data center consolidation are driving the need for increased bandwidth scalability and high-speed connections. To meet

these challenges, Advantech’s flagship NetariumTM-14 targets the high-end market where equipment providers require superior performance, scalability and deployment flexibility

for their large enterprise, managed security service provider or carrier customers.

Many different payloads can be integrated into Advantech Netarium™ systems and configured to address diverse industry applications. For more details on integrating a specific

configuration please contact your local sales representative.

Specifications

Number of slots

Front blades

14 ATCA compliant node or hub blades (12 node blades and 2 hub blades)

RTM’s

14 ATCA rear transition modules

Backplane

IPMB

Bussed

Base interface

Dual star, 1000 Base-T

Fabric interface

Dual star, up to 10Gbps per differential pair

Cooling

Technology

Four front pluggable, hot swappable high pressure fan trays with N+1 redundant fans

(no degradation with a single fan failure)

Max. Capacity

350W for front board and 35W for RTM

Air filter

Front pluggable air inlet filter with redundant presence sensor

Accessibility

Front

ATCA blades, fan trays, air filter, and AC PSU’s

Rear

RTM’s, ShMC’s, and PEM’s

Power

AC

Up to five redundant (N+1) power supply units with separate AC inlets,

1600W (at high line) and 1200W (at low line)

PSU cooling

Self cooled

DC feed

2 redundant, hot swappable PEMs w. integrated EMI filters

DC voltage

-48V / -60V

Current rating

105A@-48V and 84A@-60V via 4 studs

Shelf management

Full featured

Dual, redundant carrier board for Pigeon Point Shelf Management Mezzanine 500 (ShMM-500)

Interfaces

RMCP, SSH, SNMP, CLI, Web and serial interfaces

Telco alarms

Dual, redundant Shelf FRU Data and Telco alarm boards (Optional)

Sensors

FRU presence, fan health, PSU health, temperatures, input voltages

Miscellaneous

ESD plug

Front and rear

Cable management

Front and rear cable management trays (optional)

RoHS

COMPLIANT

2002/95/EC

All product specifications are subject to change without notice

Last updated : 19-Jun-2014