RF Micro Devices Inc.

7628 Thorndike Road, Greensboro, NC 27409-9421

DS140527

For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.

The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of

third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended

application circuitry and specifications at any time without prior notice.

7 of 11

RF5365

Evaluation Board Schematic

Vreg

Pdet

7

8

9

10

11

12

1

2

3

4

5

6

TX

RX

ANT

BT

C5

1nF

C7

1uF

C4

1nF

C6

1uF

C1

10pF

C2

10pF

C3

10pF

C8

10pF

L1

4.7nH

Note: Components C5, and C6 may not be needed in the final schematic. This will be dependent on board layout and noise coupling to these pins.

TX input connects directly to the transceiver. If no DC is present on this pin, C8 may also be eliminated.