ESD test results with DSILC6-4P6 ESD protection and M24LR16E-R

AN4326

12/17

DocID024976 Rev 1

5

ESD test results with DSILC6-4P6 ESD protection and

M24LR16E-R

ESD tests have been performed on the Printed circuit board (PCB), with two setups:

•

+/-8 kV contact discharge, according to IEC 61000-4-2 standard

•

+/-15 kV air discharge, according to IEC 61000-4-2 standard.

IEC 61000-4-2 standard defines the test setup for an equipment not connected to the earth

(see Figure 10).

Figure 10. IEC 61000-4-2 test setup

Figure 11. ESD measurement bench

For contact and air discharges, 10 shoots for each polarity per area zap have been

performed, with a frequency = 1 Hz.