| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AN4308 bảng dữ liệu(PDF) 12 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4308 bảng dữ liệu(HTML) 12 Page - STMicroelectronics |
|
12 / 14 page ![]() STCC50x1 application example AN4308 12/14 DocID024781 Rev 1 The ChargingPortEnable is the GPIO allowing the user to enable/disable the charging mode support in the BIOS. For fully automatic operation without needing any GPIO, the CTL3 and ATTACH_EN can be permanently connected to VDD. The operating modes are following: Note: Important: The ChargingPortEnable GPIO must be latched in the S0 state when the operating system is running. Toggling it under running operating system causes VBUS discharge pulse and may lead to data transfer interruption! Table 13. Operating modes Power state ChargingPortEnable = 0 ChargingPortEnable = 1 S0 SDP CDP S3 SDP with remote wakeup for all devices CDP with remote wakeup for low-speed devices DCP auto in other cases S4/S5 OFF OFF until attach detected DCP auto after attach detected |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |